reurn
mount: /tmp: mount point not mounted or bad option.
Ok, can you run
sudo nano /etc/fstab
and check if you see “noexec” in the file? IF you do, please remove it. Exit and save the file. Then log out, log in and try your installation again.
first of all I can’t thank you enough for your help I really do appreciate it thank you very much
I didn’t find noexec this is all what i get
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p1 during installation
UUID=7d62b4f5-8fde-4c21-bef8-64880acea622 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0You can double check with
cat /etc/fstab
If you see noexec
As a workaround maybe try changing the permissions of the makefile itself
chmod 777 -R /home/lotfi/rt5370/os/linux/Makefile
no noexec exist
lotfi@Lenovo:~/rt5370$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p1 during installation
UUID=7d62b4f5-8fde-4c21-bef8-64880acea622 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
I did chmod 777 -R /home/lotfi/rt5370/os/linux/Makefile
I get the same
LEX scripts/kconfig/lexer.lex.c
flex: could not create scripts/kconfig/lexer.lex.c
scripts/Makefile.host:9: recipe for target 'scripts/kconfig/lexer.lex.c' failed
make[3]: *** [scripts/kconfig/lexer.lex.c] Error 1
Makefile:594: recipe for target 'syncconfig' failed
make[2]: *** [syncconfig] Error 2
Makefile:700: recipe for target 'include/config/auto.conf.cmd' failed
make[1]: *** [include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-5.4.0-48-generic'
Makefile:356: recipe for target 'LINUX' failed
make: *** [LINUX] Error 2I wonder if you are running on a user account instead of as the admin account on your copy of Zorin. We seem to be getting cut off at each step.
I suspect that the reason the WiFi stopped working when the kernel upgraded is that the Wifi USB device had to be configured. This means that it must be reconfigured (or reinstalled) each and every time the kernel upgrades.
Normally, this is not difficult… After the kernel upgrade, the user just runs the ‘make’ and ‘sudo make install’ from the makefile directory and all is well again.
Perhaps we should step back and examine why you needed to use the USB wifi device in the first place and try to figure out where to go from there.
I just buy the WiFi adapter
Well my computer was on windows so I want to start working on Linux so I choose Zorin as Linux, my computer work fine on kernel 5.3 but ask me to update Zorin OS I checked yes and now if i’m on 5.3 it work fine but if I work with 5.4 the WiFi device not work, I have to every time when I start my computer press Esc key to choose advanced to choose 5.3 otherwise will go to 5.4 directly so i did buy a WiFi adapter to connect to internet if i’m on 5.4 like now
I understand it is very frustrating to have components not work or keep switching back and forth.
Does built in Wifi work with either kernel?
the wifi adapter ?
Yes work on all karnel
The built-in wifi device does not work on 5.4 kernel, but the wifi adapter does?
yes that right
I just see that the title of my post was changed ; there is a mistake not the usb who is not working the wifi of my computer the usb wifi is working good
Now even if I use kernel 5.3 the wifi not working
this is the zorin
When I press Advanced option for Zorin
The Kernels I have, none of them have a working WIFI
without WIFI adapter I get
WI-FI Networks
device not managed
when I use WIFI adapter
I see the title of my post was changed there is a big mistake; not the usb who is not working, the usb wifi adapter working perfect. the wifi of my laptop is the problem, If I use the usb I can connect to internet but if I want to connect to internet without usb I can’t.
Thanks for letting us know. I changed the title.
1 Like
I big misunderstanding, there…
Within the first few posts in the thread, you state that you are using a wifi adapter. You are asked what it is, and you name it.
From that point, we were troubleshooting the adapter. All our steps and terminal commands were based on that. Which would explain all of the difficulty… We were using make commands on something already made.
And we were configuring based on something already configured.
You can use in terminal
ifconfig
To examine your network devices and disable or enable the ones you need.
For example
sudo ifconfig wlan1 up
To enable if you are using wlan1 as your built in Wifi.
ifconfig :
br-3fb11dc8cf28: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.19.0.1 netmask 255.255.0.0 broadcast 172.19.255.255
inet6 fe80::42:46ff:fe0f:1579 prefixlen 64 scopeid 0x20<link>
ether 02:42:46:0f:15:79 txqueuelen 0 (Ethernet)
RX packets 3 bytes 116 (116.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1689 bytes 335054 (335.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
br-5aec900db893: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.18.0.1 netmask 255.255.0.0 broadcast 172.18.255.255
ether 02:42:a3:0a:be:9f txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
br-cd1671f0804a: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.20.0.1 netmask 255.255.0.0 broadcast 172.20.255.255
inet6 fe80::42:e2ff:fe84:54d7 prefixlen 64 scopeid 0x20<link>
ether 02:42:e2:84:54:d7 txqueuelen 0 (Ethernet)
RX packets 4 bytes 176 (176.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1689 bytes 335094 (335.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
ether 02:42:f0:c7:d6:05 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 307815 bytes 18776047 (18.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 307815 bytes 18776047 (18.7 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth149a8c0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::b094:69ff:fe27:e040 prefixlen 64 scopeid 0x20<link>
ether b2:94:69:27:e0:40 txqueuelen 0 (Ethernet)
RX packets 4 bytes 232 (232.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1780 bytes 346192 (346.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth2f0f8f7: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::500c:fff:fed1:66fa prefixlen 64 scopeid 0x20<link>
ether 52:0c:0f:d1:66:fa txqueuelen 0 (Ethernet)
RX packets 3 bytes 158 (158.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1780 bytes 346126 (346.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth49ab17b: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::14e8:bff:feef:5b92 prefixlen 64 scopeid 0x20<link>
ether 16:e8:0b:ef:5b:92 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1765 bytes 344492 (344.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth7e9b380: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::d461:8bff:fee0:d5f prefixlen 64 scopeid 0x20<link>
ether d6:61:8b:e0:0d:5f txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1756 bytes 342989 (342.9 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlx1cbfce1ac56a: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.128 netmask 255.255.255.0 broadcast 192.168.2.255
inet6 fe80::bcc0:a16b:9ea5:ce7e prefixlen 64 scopeid 0x20<link>
ether 1c:bf:ce:1a:c5:6a txqueuelen 1000 (Ethernet)
RX packets 681745 bytes 825752443 (825.7 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 313618 bytes 65636211 (65.6 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
sudo ifconfig wlan1 u
wlan1: ERROR while getting interface flags: No such device
I get error with your code can you please try to see what is the problem
Thank you
Bynd, I provided an example. You need to use ifconfig to find your wireless ID
Looking at what you posted, try
sudo ifconfig wlx1cbfce1ac56a up
it doesn’t work; still the same problem
Are you running the Zorin OS as a Virtual System?