Now the mousepad is completly fast and sensitive... Altough the settings for Speed and Intensity dont work... How to reset the setting
And the keyboard doesnt work too... Please help me
Please try:
sudo apt install xserver-xorg-input-all
Its not posdible to press enter. The writen text is copied from telegram writen with smartphone
If you reboot into Recovery Mode, you should be able to enable networking, then go to Drop To Prompt- then run the command - your keyboard should be working fine at that stage.
I found network. I can choose enable Networking but than nothin happens. I tried "sudo netplan apply" nothing happend...
From drop to prompt in the recovery menu, what does
sudo apt install xserver-xorg-input-all
Yield (even if enabling network gave no other indication of working?)
I solved the problem with screen keyboard. And the "sudo isntall xserver-xorg-input all" Thanks for your help.
But the recovery mode didnt work well...
1 Like
The touchpad now has very strange effects: after downloading the link for better settings of the touchpad, for example, accidental touches while typing are disabled. But unfortunately while using the Internet: When you tap on the touchpad, a new tab is usually opened, which, however, disappears again when you click on the touchpad again. In addition, the touchpad does not always work reliably. Which almost brings me back to Windows ... I need to have something reliable to work with
Can you please open Settings and navigate to "Mouse and Touchpad."
The first tab is Devices. Does it show an option to "Disable touchpad while typing?"
Is that checked on or off?
yes its activated, but there are some problems while using the touchpad.... Sometimes in Open Office you klick and its copied the last written word....
1 Like
What is the terminal output of
xinput list-props 11
Device 'ETPS/2 Elantech Touchpad':
Device Enabled (164): 1
Coordinate Transformation Matrix (166): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (294): 1
Device Accel Constant Deceleration (295): 2.500000
Device Accel Adaptive Deceleration (296): 1.000000
Device Accel Velocity Scaling (297): 12.500000
Synaptics Edges (298): 59, 1421, 39, 701
Synaptics Finger (299): 1, 1, 0
Synaptics Tap Time (300): 180
Synaptics Tap Move (301): 72
Synaptics Tap Durations (302): 180, 180, 100
Synaptics ClickPad (303): 0
Synaptics Middle Button Timeout (304): 75
Synaptics Two-Finger Pressure (305): 282
Synaptics Two-Finger Width (306): 7
Synaptics Scrolling Distance (307): 33, 33
Synaptics Edge Scrolling (308): 0, 0, 0
Synaptics Two-Finger Scrolling (309): 1, 0
Synaptics Move Speed (310): 1.000000, 1.750000, 0.120919, 0.000000
Synaptics Off (311): 1
Synaptics Locked Drags (312): 0
Synaptics Locked Drags Timeout (313): 5000
Synaptics Tap Action (314): 2, 3, 0, 0, 1, 3, 2
Synaptics Click Action (315): 1, 1, 0
Synaptics Circular Scrolling (316): 0
Synaptics Circular Scrolling Distance (317): 0.100000
Synaptics Circular Scrolling Trigger (318): 0
Synaptics Circular Pad (319): 0
Synaptics Palm Detection (320): 0
Synaptics Palm Dimensions (321): 10, 200
Synaptics Coasting Speed (322): 20.000000, 50.000000
Synaptics Pressure Motion (323): 30, 160
Synaptics Pressure Motion Factor (324): 1.000000, 1.000000
Synaptics Resolution Detect (325): 1
Synaptics Grab Event Device (326): 0
Synaptics Gestures (327): 1
Synaptics Capabilities (328): 1, 0, 1, 1, 1, 1, 1
Synaptics Pad Resolution (329): 31, 31
Synaptics Area (330): 0, 0, 0, 0
Synaptics Noise Cancellation (331): 8, 8
Device Product ID (291): 2, 14
Device Node (290): "/dev/input/event6"
Some say that the xorg drivers work better than Libinput for this device:
sudo apt install xserver-xorg-input-synaptics
1 Like
just copy and paste in terminal? Or its necessary to remove the old version? Because nothing happend...
If already installed... Then that may not be the helpful solution.
I restored to searching the web on this (Elantech is notorious...):
This user suggests it is a BIOS Setting (So may work on some computers)
the link describes only the function to disable the touchpad by using FN and F7.... it doesnt change anything... thanks for your help.
How can i deinstall the function, cause the touchpad isnt reliable anymore....
replace 'install' with 'remove' in the command that Aravisian posted.
1 Like
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.