I agree with you. This is very frustrating.
That should have been more effective than that...
Above, it says sdc5.
Are you referring to a different drive now, or is more than one drive affected?
Can you layout what each drive or partition does?
For example, is one drive Root, another /home, another /boot and so on?
It's just sdc2, I just entered the wrong number. It's installed on it's own drive on my PC. There are 3 drives in the PC. Two are for Windows and one for linux.
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 500M 0 part
└─sda2 8:2 0 465.3G 0 part
sdb 8:16 0 931.5G 0 disk
└─sdb1 8:17 0 931.5G 0 part
sdc 8:32 0 232.9G 0 disk
├─sdc1 8:33 0 512M 0 part /boot/efi
└─sdc2 8:34 0 232.4G 0 part /
sr0 11:0 1 1024M 0 rom
I’m still slow on this. To me, your output here is the same for sdc1 from /dev/sdc5 32 gig? - #3 by FlamingDuck , so I get that partition.
But the size for sdc5 in your older post seems to be closest to the size for sdc2 in your most recent post.
That confused me for a minute there. The earlier post is from the original install. The HD in that case is the same one but at the time it was showing as 228 G with 32 G used, with almost nothing installed except some apps. After trying some of the suggestions without success I bought the Pro version of Zorin and after a clean install is looks like it went from SDC5 to SDC2. There's nothing on this drive so I wasn't concerned about a clean install. I'm curious if Zorin can solve this problem, which is why I bought the Pro version.
I'm using the same 250 G Samsung drive for all installs. The other drives are Windows. Right now the drive is at 228G with 66G used. Again that's just with a few apps installed.
Ah, I see. Thanks for explaining.
Thanks. I tried that one on the original install. It didn't help at all.
So when I can into the /var folder the lib folder in there has 17+ gig, log has 40.5 gig. Found this going on in the syslog.1
ACPI BIOS Error (bug): Could not resolve symbol [_GPE._L6F.PGRT], AE_NOT_FOUND (20201113/psargs-330)
ACPI Error: Aborting method _GPE._L6F due to previous error (AE_NOT_FOUND) (20201113/psparse-529)
As well as a couple other lines. No idea what it means.
You might try using the grub parameter "noacpi" and see if that reduces the log buildup...
I'm going to wait until I hear back from Zorin Support. See if they can fix this.
Any idea when they're "back in the office"? Curious to see if I can get my issue resolved.
I moved your post here. Starting a new thread will only confuse people since they won't know which issue you're referring to.
I was confused by "wait until I hear back from Zorin Support" as your forum profile says you have Core which does not include that entitlement.
Please edit your forum profile to indicate "Pro" instead of "Core".
Note there are just two Zorin devs, so reply to your support request may take some time. I believe 3 Jan is a public holiday in Ireland.
If you are in a hurry, you may be better off continuing to receive online support from the community here on the forum.
@FlamingDuck In my experience you can get answear about a month from support. Here you get faster answear. Here also people have a good experience. Mostly the answears on forum are the same what on support.
Done. 
So far I haven't found a solution to this problem. The dev/sdc5 is at around 82 gigs. It's quite frustrating. As I mentioned it was the same issue with PopOs. Both are Ubuntu based and I've found posts about this from 7 years ago. So far no fix.
Here is from 2021 but from reddit not always tips could be good, can testing on your risk.
It seems like a number of people have had this issue over the years but there's no easy fix. Using a non-Ubuntu distro may be the answer, but that doesn't fix the problem.
Nobody in this world is perfect.
No, but the oldest post I've now found about this issue is 8 years 7 months.... and it's still an issue. I'll see if I can get a fix for a couple more weeks, but if not I think I'll pack linux away for a couple years and see what happens then. This is just taking up too much time and I've only just installed. At this point I don't have to worry about losing files and whatnot because I don't use Linux as a daily drive, and this is why. So for now I can experiment. In the past couple months I've tried Linux Mint, PopOs, and now Zorin. Just getting a little tired of troubleshooting one problem. I appreciate all the help and suggestions.