Zorin Not booting after restarting

Hi there
Everything was going ok and I've done a restart after a clean install.
I don't have dual boot and the OS is installed on new SSD.
I've deactivated the fast boot, but the secure boot is greyed out set on enable.
I have an Asus. Thanks

This is what I get from Boor Repair

boot-repair-4ppa2081-zorin1                                              [20260222_2209]

============================== Boot Info Summary ===============================

 => Grub2 (v1.99-2.00) is installed in the MBR of /dev/sda and looks at sector 
    2048 of the same hard drive for core.img, but core.img can not be found at 
    this location.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Zorin OS 18
    Boot files:        /boot/grub/grub.cfg /etc/fstab /etc/default/grub

sdc: ___________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/FD/sdc: /dev/sdc already mounted or mount point busy.
       dmesg(1) may have more information after failed mount system call.


================================ 1 OS detected =================================

OS#1 (linux):   Zorin OS 18 (18) on sdb2

================================ Host/Hardware =================================

CPU architecture: 64-bit
Video: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] from Advanced Micro Devices, Inc. [AMD/ATI]
Live-session OS is Zorin 64-bit (Zorin OS 18, noble, x86_64)

===================================== UEFI =====================================

BIOS/UEFI firmware: 1002(4.6) from American Megatrends Inc.
This live-session is in Legacy/BIOS/CSM mode (not in EFI mode).



============================= Drive/Partition Info =============================

Disks info: ____________________________________________________________________

sda	: is-GPT,	no-BIOSboot,	has-noESP, 	not-usb,	not-mmc, no-os,	no-wind,	34 sectors * 512 bytes
sdb	: is-GPT,	no-BIOSboot,	has---ESP, 	not-usb,	not-mmc, has-os,	no-wind,	2048 sectors * 512 bytes

Partitions info (1/3): _________________________________________________________

sda1	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	end-after-100GB
sda2	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	end-after-100GB
sdb1	: no-os,	64, nopakmgr,	no-docgrub,	nogrub,	nogrubinstall,	no-grubenv,	noupdategrub,	not-far
sdb2	: is-os,	64, apt-get,	signed grub-pc grub-efi ,	grub2,	grub-install,	grubenv-ok,	update-grub,	end-after-100GB

Partitions info (2/3): _________________________________________________________

sda1	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot, ext4
sda2	: isnotESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot, ext4
sdb1	: is---ESP,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot, vfat
sdb2	: isnotESP,	fstab-has-bad-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot, ext4

Partitions info (3/3): _________________________________________________________

sda1	: maybesepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sda2	: maybesepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sda
sdb1	: not--sepboot,	no---boot,	part-has-no-fstab,	not-sep-usr,	no---usr,	part-has-no-fstab,	no--grub.d,	sdb
sdb2	: not--sepboot,	with-boot,	fstab-without-boot,	not-sep-usr,	with--usr,	fstab-without-usr,	std-grub.d,	sdb

fdisk -l (filtered): ___________________________________________________________

Disk sda: 931.51 GiB, 1000204886016 bytes, 1953525168 sectors
Disk identifier: 505ECACC-499C-4069-BC36-E2A8AC8BEDAC
         Start        End   Sectors   Size Type
sda1         34  976564257 976564224 465.7G Linux filesystem
sda2  976566272 1953523711 976957440 465.8G Linux filesystem
Disk sdb: 1.82 TiB, 2000398934016 bytes, 3907029168 sectors
Disk identifier: B597625A-0C3F-42FA-8618-AD353DF5CE1B
       Start        End    Sectors  Size Type
sdb1     2048    1050623    1048576  512M EFI System
sdb2  1050624 3907028991 3905978368  1.8T Linux filesystem
Disk sdc: 7.5 GiB, 8053063680 bytes, 15728640 sectors
Disk identifier: 0x30cb82d5
     Boot   Start      End Sectors  Size Id Type
sdc1  *          0  7391103 7391104  3.5G  0 Empty
sdc2           604    10843   10240    5M ef EFI (FAT-12/16/32)
sdc3       7393280 15728639 8335360    4G 83 Linux

parted -lm (filtered): _________________________________________________________

sda:1000GB:scsi:512:512:gpt:ATA Samsung SSD 860:;
1:17.4kB:500GB:500GB:ext4::;
2:500GB:1000GB:500GB:ext4::;
sdb:2000GB:scsi:512:512:gpt:ATA Samsung SSD 870:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:2000GB:2000GB:ext4::;
sdc:8053MB:scsi:512:512:msdos:General UDisk:;
2:309kB:5552kB:5243kB:::esp;
3:3785MB:8053MB:4268MB:ext4::;

Free space >10MiB: ______________________________________________________________

sdc: 5.29MiB:3610MiB:3605MiB

blkid (filtered): ______________________________________________________________

NAME   FSTYPE   UUID                                 PARTUUID                             LABEL                  PARTLABEL
sda                                                                                                              
├─sda1 ext4     a1fe4db8-7f97-43d6-b4c3-c8a709c579da 42b04274-816d-4430-a20c-126efabb1c61 backup-860             
└─sda2 ext4     2c3e5025-091a-4355-a1ab-8ce554528343 30aa4ebe-c11e-4b2d-8879-711921038a61 new_860_back           
sdb                                                                                                              
├─sdb1 vfat     E64D-CF75                            e9ca1b35-caf6-452d-a44f-a917eef4453b                        EFI System Partition
└─sdb2 ext4     b744362e-fd9f-4c24-b129-48f497bf08e8 8efbef83-c747-498f-a8c0-9b05d8a5a66a                        
sdc    iso9660  2025-10-13-20-57-57-00                                                    Zorin OS 18 Core 64bit 
├─sdc1 iso9660  2025-10-13-20-57-57-00               30cb82d5-01                          Zorin OS 18 Core 64bit 
├─sdc2 vfat     7CC1-2D2A                            30cb82d5-02                                                 
└─sdc3 ext4     55dde4cd-992b-432c-8a6c-8bfff615adc4 30cb82d5-03                          writable               

Mount points (filtered): _______________________________________________________

             Avail Use% Mounted on
/dev/sda1     434G   0% /mnt/boot-sav/sda1
/dev/sda2   434.2G   0% /mnt/boot-sav/sda2
/dev/sdb1     511M   0% /mnt/boot-sav/sdb1
/dev/sdb2     1.6T   7% /mnt/boot-sav/sdb2
/dev/sdc1        0 100% /cdrom
/dev/sdc3     3.6G   0% /media/zorin/writable

Mount options (filtered): ______________________________________________________

/dev/sda1   ext4            rw,relatime
/dev/sda2   ext4            rw,relatime
/dev/sdb1   vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
/dev/sdb2   ext4            rw,relatime
/dev/sdc1   iso9660         ro,noatime,nojoliet,check=s,map=n,blocksize=2048,iocharset=utf8
/dev/sdc3   ext4            rw,nosuid,nodev,relatime

====================== sdb2/boot/grub/grub.cfg (filtered) ======================

Zorin OS   b744362e-fd9f-4c24-b129-48f497bf08e8
Linux Mint 22.2 Zara (22.2) (on sda3)   747ef5b2-7982-4f5b-b22a-4955d16d6cea
### END /etc/grub.d/30_os-prober ###
UEFI Firmware Settings   uefi-firmware
### END /etc/grub.d/30_uefi-firmware ###

========================== sdb2/etc/fstab (filtered) ===========================

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb2 during installation
UUID=b744362e-fd9f-4c24-b129-48f497bf08e8 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=FF4C-FD15  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0

======================= sdb2/etc/default/grub (filtered) =======================

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`( . /etc/os-release; echo ${NAME:-Ubuntu} ) 2>/dev/null || echo Ubuntu`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
GRUB_THEME=/usr/share/grub/themes/zorin/theme.txt
GRUB_DISABLE_MEMTEST=true

==================== sdb2: Location of files loaded by Grub ====================

           GiB - GB             File                                 Fragment(s)
  15.709854126 = 16.868327424   boot/grub/grub.cfg                             1
  10.985313416 = 11.795390464   boot/vmlinuz                                   1
  12.688472748 = 13.624143872   boot/vmlinuz-6.14.0-33-generic                 2
  10.985313416 = 11.795390464   boot/vmlinuz-6.17.0-14-generic                 1
  12.688472748 = 13.624143872   boot/vmlinuz.old                               2
1576.923480988 = 1693.208694784 boot/initrd.img                                1
  10.336666107 = 11.098910720   boot/initrd.img-6.14.0-33-generic              1
1576.923480988 = 1693.208694784 boot/initrd.img-6.17.0-14-generic              1
  10.336666107 = 11.098910720   boot/initrd.img.old                            1

===================== sdb2: ls -l /etc/grub.d/ (filtered) ======================

-rwxr-xr-x 1 root root 18123 May 17  2025 10_linux
-rwxr-xr-x 1 root root 43192 May 17  2025 10_linux_zfs
-rwxr-xr-x 1 root root 14513 May 17  2025 20_linux_xen
-rwxr-xr-x 1 root root   786 May 17  2025 25_bli
-rwxr-xr-x 1 root root 13120 May 17  2025 30_os-prober
-rwxr-xr-x 1 root root  1174 May 17  2025 30_uefi-firmware
-rwxr-xr-x 1 root root   722 Jul 11  2025 35_fwupd
-rwxr-xr-x 1 root root   214 May 17  2025 40_custom
-rwxr-xr-x 1 root root   215 May 17  2025 41_custom



Suggested repair: ______________________________________________________________

The default repair of the Boot-Repair utility would reinstall the grub-efi of
sdb2,
using the following options:  sdb1/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file

Blockers in case of suggested repair: __________________________________________

 The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. This will enable this feature.

Final advice in case of suggested repair: ______________________________________

Please do not forget to make your UEFI firmware boot on the Zorin OS 18 (18) entry (sdb1/efi/****/grub****.efi (**** will be updated in the final message) file) !
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.

The .iso was most likely burned as EFI (Extensible Firmware Interface), but your system is using MBR (Legacy Master Boot Record)
In your BIOS settings, you can disable Legacy MBR - then load the Live USB, launch Gparted, create an EFI partition of about 512 Megabytes in size

Then reinstall Zorin OS.

Alternatively, you can reburn the .iso as MBR, instead of EFI, leave the MBR set in your BIOS and install Zorin OS using the MBR.

2 Likes

So no matter what a reinstall is required?
Thanks I will try and report back.

Most distros these days state only 300 Mb is needed. I have however started using a conversion tool as Linux uses MebiBytes not MegaBytes.

After a new installation it works.
Thanks all

1 Like