I had a 100% worn SSD running Windows 11 up until yesterday. I was able to install Zorin 18 Core, so I could finally shed myself after over 30 years of MS, and did an erase and replace. After doing so, I did remove the SSD, which was becoming problematic, and used my iso stick to install Zorin onto my other internal storage, an HDD.
The main question being is when I install a new SSD, I would like that to be the boot drive. I am mainly curious if my machine will be looking to dual boot from either the SSD or the HDD with the same OS. Also, whether they would conflict if I'm looking to add a native package, like Firefox as an example.
I figure a fresh install on the SSD would work best, as Zorin will need to set partitions on the new drive, but is there anything I should, or need to do with the HDD other than setting the SSD as the boot drive?
Hi and welcome.
I only had an SSD once which I donated to my eldest who wanted Windows 11 upgrade, an M.2 SATA.
That said I would still choose manual partitioning. The main thing you may have to do is ensure FastBoot is disabled in the BIOS. With regards Windows 11 drive, did it have BitLocker enabled? If it did it needs disabling.
Does your computer have Intel RST (Rapid Storage Technology) settings for hard drives? If it does this will also have to be disabled, and also make sure that in the BIOS that RAID is changed to AHCI.
If your RAM present in the machine is 8 Gb or more you won't need a swap area.
If you want to maintain Secure Boot I recommend you use Ventoy to create the installation media as it includes a MOK util to enable the USB drive to be enrolled into EFI to enable install. You should choose the GPT option when creating the install method.
With regards to dual booting, the os-prober should pick the other installation during install and present it in the GRUB menu when booting post install.
If you want a guide on partitioning then see my post here:
[Footnote: I changed your thread title to reflect that GNU is primarily the libraries that make up the OS, Linux is the kernel that makes the OS work.
. Free Advice | Blue Penguin Computing]
Welcome to the Forum!
I would suggest the Following:
When You have the new SSD, save all Your current Data and have a prepared Bootstick with Zorin at Hand.
When ready, start the Zorin Bootstick in Live Mode and remove everything from Your HDD. Then put in the SSD in Your Machine. And the start the Bootstick again and start the Installation Process.
Choose the Install Option ''Something else''. There choose Your SSD and create 2 Partitions:
- And EFI-Partition with 300mb
- For Rest of the Drive choose the Mount Point
/and format it to ext4
Then install the System. When installed, You can format the HDD to ext4 when You only use it for Linux.