Ethernet message at boot

Hardware Support
1

Hi
Im using Zorin Lite.
And at boot I get these messages about Realtek Ethernet.
One picture is with no Ethernet cable the other is with cable connected.
Internet works on Ethernet and wifi.

How to fix this?

Thanks

20230522_234235
20230522_2342351920×1440 102 KB

20230522_232907
20230522_2329071920×1440 96 KB

After lshw command:

*-network
                description: Ethernet interface
                product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 7
                bus info: pci@0000:05:07.0
                logical name: enp5s7
                version: 10
                serial: 00:1d:60:f1:56:0a
                size: 10Mbit/s
                capacity: 100Mbit/s
                width: 32 bits
                clock: 33MHz
                capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=64 mingnt=32 mul

*-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:2
       logical name: wlx001644124d02
       serial: 00:16:44:12:4d:02
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8187 driverversion=5.15.0-72-generic firmware=N/A ip=192.168.1.27 link=yes multicast=yes wireless=IEEE 802.11
2
1 Like
3

Thank you.
I had Network boot enabled as first device.
I desabled it in BIOS.

1 Like
4

Be careful with bios settings. Net boot is a minor setting but it goes to show just how small of a setting change can hang a perfect machine. And btw...my box's new name is Jesus! :rofl:

1 Like
5

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.