I can see the vumeter moving in zorin sound settings when I perform a sound test but I can't heard nothing. If I plug a headset in jack I can hear the sound test.
I installed the pulse audio following other post solutions here, if some one can help me.
I don't remember in which zorin version did it stop working.
Thank you!
toni@hp-compaq-6730s:~$ sudo lshw -C sound
[sudo] contraseña para toni:
*-usb
descripción: Vídeo
producto: CKF7063
fabricante: Chicony Electronics Co., Ltd.
id físico: 5
información del bus: usb@1:5
versión: 33.19
serie: SN0001
capacidades: usb-2.00
configuración: driver=uvcvideo maxpower=98mA speed=480Mbit/s
*-multimedia
descripción: Audio device
producto: 82801I (ICH9 Family) HD Audio Controller
fabricante: Intel Corporation
id físico: 1b
información del bus: pci@0000:00:1b.0
versión: 03
anchura: 64 bits
reloj: 33MHz
capacidades: pm msi pciexpress bus_master cap_list
configuración: driver=snd_hda_intel latency=0
recursos: irq:32 memoria:d8900000-d8903fff
toni@hp-compaq-6730s:~$ lspci -nnk | grep -A2 Audio
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company 82801I (ICH9 Family) HD Audio Controller [103c:3614]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
toni@hp-compaq-6730s:~$ sudo dmesg|grep audio
[ 10.536295] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1984A: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:speaker
[ 10.536307] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.536312] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 10.536316] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 10.536319] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 10.536322] snd_hda_codec_analog hdaudioC0D0: Internal Mic=0x15
[ 10.536326] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
[ 10.536329] snd_hda_codec_analog hdaudioC0D0: Line=0x1c
My other info to avoid "analog" error in forum:
https://pastebin.com/u9uxybVg
