Replacing M2 with Zorin

Hello everyone,

I had to replace the M2 hard drive on which Zorin was installed with another hard drive running Windows. When I physically re-installed the Zorin hard drive in the PC, it was extremely slow to boot up, and once booted, it responded slowly to commands and the mouse cursor had disappeared. The only way to get it to start is to press Ctrl+Alt+Del, put it into standby mode, and then it boots up normally.

The hard drive is the one in the photo below: is there any way to restore normal booting?

Hi. We don't know enough about your machine specs, how you copied from M.2 to the new nvme, but in the meantime would be curious to know if Intel VMD is the culprit: