Thinkpad T490 on Zorin 18 Mouse dies after sleep mode

Mouse works effectively on boot or login, after closing the lid and then opening up the mouse pointer is visible but frozen and unresponsive.

Opening a terminal it sometimes responds to
sudo modprobe -r psmouse && sudo modprobe psmouse

Occasionally the thing just freezes....

1 Like

Welcome to the Forum!

  • Are Secure Boot and Fast Boot in BIOS disabled?
  • If Windows is still installed: Is Fast Start-Up in Windows disabled?
  • Does Your System run in Wayland or X11? You can check that with the Command echo $XDG_SESSION_TYPE via Terminal
1 Like

Hi and welcome.

I used Mojeek, then the Brave search engine it offers as an alternative. As Zorin 18 is based on Ubuntu 24.04 I used that in the search criteria.

Brave always comes back with an A.I. search result first which gives:

" The most effective fix for a frozen ThinkPad touchpad on Ubuntu 24.04 after waking from sleep is to automatically restart the touchpad driver using a systemd sleep script.

Create a script to reload the psmouse kernel module upon resume by running:

sudo nano /lib/systemd/system-sleep/restart-touchpad.sh

Paste the following content into the file:

#!/bin/bash

if [ "${1}" == "post" ]; then
  echo "Reloading psmouse kernel module to fix touchpad."
  sleep 0.5s
  sudo modprobe --remove psmouse
  sudo modprobe psmouse
fi

Make the script executable with:

sudo chmod +x /lib/systemd/system-sleep/restart-touchpad.sh

If the touchpad is currently frozen, you can manually run sudo /lib/systemd/system-sleep/restart-touchpad.sh post or manually execute sudo modprobe --remove psmouse followed by sudo modprobe psmouse to restore functionality. Some users may also need to try restarting the i2c_hid or i2c_hid_acpi modules instead, depending on their specific hardware configuration.

AI-generated answer. Please verify critical facts."

1 Like

In addition to the other recommendations you can try it with this command after suspend:

sudo modprobe -r i2c_hid_acpi &&
sudo modprobe i2c_hid_acpi

or test it with kernel 6.8 or a higher power mode, e.g. balanced, if you are running on power safing mode.

2 Likes