Unable to install Zorin 18.1 due to Black screen on MSI Raider GE78 HX 13V laptop

I am very new to Linux/Zorin because I'm tired of the junk in Windows. I installed Zorin onto an older Dell Latitude E6540 with minimal issues. I have an MSI Raider GE78 HX which is a decent higher end laptop and I cannot get Zorin to install on it. I have Zorin on a usb drive and sometimes I can get option 2 (safe graphics) to load from USB, but the other two I have yet to see it boot from. Mostly I get a black screen somewhere in the boot process. The system is a 13th gen intel i9-13950HX 2200MHz, 32MB DDR5 RAM, with 2 graphics controllers (Intel and I believe the other is an nvidia 4080. I cant get the actual system specs because I've already formatted the SSD that had Windows on it. Am I out of luck with this model laptop?

Hi and welcome.

Zorin 18.1 is based on Ubunru 24.04.
I have tried to avoid using A.I. search results, but sometimes I get weak:

"Users report that the MSI Raider GE78 HX often experiences kernel panics, blue screens, or freezes in Ubuntu 24.04, frequently attributed to Intel 13th/14th gen CPU instability or NVIDIA driver conflicts .

Common Fixes:

  • Disable Intel VMD/RST: The installer often cannot see the drive because Intel VMD is enabled; you must unlock the hidden BIOS menu (often Right Shift + Right Ctrl + Left Alt + F2 ) and disable VMD to allow Ubuntu to detect the SSD.

  • NVIDIA Drivers: Install the open NVIDIA driver (e.g., sudo apt install nvidia-driver-570-open ) rather than the proprietary closed-source version, as the latter often fails to initialize on newer RTX 40-series GPUs in Ubuntu 24.04.

  • Kernel Parameters: Add nomodeset or acpi_osi=! to the GRUB boot line if the system freezes during installation or boot, particularly for display and suspend issues.

  • Secure Boot: Ensure Secure Boot is disabled in the BIOS, as it frequently blocks Linux kernel modules and NVIDIA drivers on MSI laptops.

AI-generated answer. Please verify critical facts."

Typically Zorin does not show the GRUB menu during boot, all you get is the glowing 'Z' logo followed by the animated 'ZORIN' splash.

If you boot off the installation media and select 'Try Zorin' you should be able to access 'Boot Repair'. In the past I have had to do this to get GRUB showing at boot time.

The other usual suspects are Secure Boot and Fast Boot in the BIOS, so be sure that these are disabled.

Lastly, ensure your BIOS is up-to-date.

1 Like

Welcome to the Forum!

  • Are Secure Boot and Fast Boot in BIOS disabled?
  • Did You checked the Checksum of the ISO?
  • Is Your BIOS in UEFI or Legacy Mode?
  • What Tool did You use to create the Bootstick?
  • How is Your USB Stick formatted?
2 Likes