Which AMD driver for Zorin 18.1

First, my GPU (XFX 9060 XT 16GB) is fully functional.

This Zorin install is only a couple weeks old, and all of my time has been spent on Setting up basic stuff for every day type use. So I only have a few games installed (Quake4, Quake Live, The Forest, Wurm Online). My FPS seems solid, however with Quake Live and Quake4 Its fast (FPS), but the motion on monitor is less than smooth. Almost like a refresh issue. I have V-Sync on. So this is not screen tearing.

So after setting up the fundamentals of the OS, I am now ready to dig in to the GPU portion of the system.

So at this time (some threads are for zorin 17), I would like to know what GPU driver is recommended for the (9060 XT 16GB) on Zorin 18.1, And any other information on installing it.

the linux kernel has the AMD drivers built in of course as they get updated they are slowly added into the kernel

if you would like to make sure you have current one here is link to driver download its is a .deb file and by double clicking it should open the software store to be installed

https://www.amd.com/en/support/downloads/drivers.html/graphics/radeon-rx/radeon-rx-9000-series/amd-radeon-rx-9060-xt.html

will be top one ubuntu 24.04.4

3 Likes

Agreed, AMD drivers are baked into the Linux kernel, at a 350 degrees F of crispy perfection. There is no need to hunt for drivers, like us Nvidia users. Just another + for AMD.


4 Likes

If you'd like to try newer AMD drivers, you can also install a later kernel and test it, e.g. with the mainline installer tool.

They only work with disabled secure boot.

3 Likes

Well, I have only updates from preinstalled packages. I'm wondering if this is the best I should expect. (for now)

Experiment with a kernal oof

Secure boot is disabled as I live alone

2 Likes

So really I am looking for a solution to alleviate the frame studder from frames to the monitor.

Some users with current hardware install a later kernel and add a ppa for later amd drivers as e.g. ppa oibaf, ernest or kisac mesa fresh

Your hardware is a year old. I'm not sure if you need it.

Edit:
However, this occurred more frequently among users of Zorin 17 (when Zorin 18 has not been released yet) because Zorin 17 is based on kernel 6.8. Zorin 18 uses kernel 6.17, which is a very recent version, so only a very small number of users need an even newer kernel for their hardware

2 Likes

Ya a whole year old :stuck_out_tongue:

Thank you sir.

I wrote this because kernel 6.17 Zorin 18 uses was released in September 2025, and when your hardware is older than the kernel then it should be supported.

Did you test if it makes a difference if you are running on Wayland or Xorg? At loginscreen you can switch between both when you click on the cogwheel.

1 Like

Ok fair. So what driver should I install without a guessing game?

I have not tried Xzorg

Then try Xorg first and test if it is better then.

1 Like

Im scared lol

Lts say i fk around. How do I revrt. Timeshift I assume

You don't need to worry about that. Switching between Xorg and Wayland won't break anything.
If it doesn't work properly, log out and switch back to Wayland. Nothing will happen.

1 Like

Yes, with timeshift you can go back.
You don't need to worry about the change to Xorg. It is not as risky as with a new graphics driver or kernel installation.

1 Like

im still scaredok i will follow Ai
And then come bach after I break sometthing

This is the most common piece of advice given here on the forum when something isn't working as well as it should, and it has helped so many times. It's very easy to switch—just one click, and that's all there is to it. Most users wouldn't even realize they're using a different display server protocol afterward, because visually, you often don't notice any difference at all.
On some devices, performance may be worse, but on many others, it's better.

I'm not an A.I.:wink:

And we are talking about a change of wayland to xorg now, or are you planning other things with A.I.? Then be careful.

3 Likes