Scenario: Lenovo V-Series laptop, 16GB RAM, formerly running windows 10 from a 1TB HDD and a 16GB SSD. The SSD is replaced now with a 1TB SSD.
Currently Zorin core is installed on the HDD which is incredibly slow.
I want to install Zorin on the currently unformatted SSD and use the HDD as storage only.
I guess first I will have to format the HDD using Zorin live from the boot stick and then, during full installation, select "do something else" and then select the SSD.
Questions:
Is it enough to simply select the SSD and let the Zorin installer do the rest by itself, or do I need to create the EFI partition and the home partition on the SSD myself?
Do I need a swap partition? If yes, what size should it have?
The goal eventually is, to run windows 10 inside a VM created with virt-manager and run metatrader MT4/MT5 inside the VM. So the whole setup must be fast and super responsive. So swap recommended?
(Please no suggestions to run MT4/MT5 directly under linux, I tried all the possible options like wine, bottles, etc. and it totally sucks )
Hi. In respect of a swap area, this won't be needed. You have 16 Gb RAM which is more than enough memory. You can create your partitions under something else, useful if anything goes wrong so you would only need to reinstall the root file system (/) leaving /home intact.
GParted is no longer present in Zorin when choosing something else. Instead you just get a bar divided into different blocks.
So first you need to create an EFI partition of 300 Mb - but you will notice in the installer that GNU/Linux uses Mebibytes, not Megabytes.
So 300 Mb = 286 MiB formatted to FAT32
Next will be root file system /, 80 Gb ≅ 76294 MiB formatted to Ext4 FS
Whatever is left, format to Ext4 FS and mark as /home.
If you are going to create a VM of Windows 10, just to be on the safe side I would advise a separate folder inside of /home to use as the 'pool' for VM images, should you want to try other Operating Systems. By default, virt-manager's default location for the 'pool' lives inside of /var which if it gets filled up leads to an unbootable system.
I would also recommend you use Timeshift and that you store backups either on the HDD or inside of /home and reduce the snapshot frequency from 5 a day (default) to 3. If creating snapshots to the HDD or an External Drive then it will need to be formatted to Ext4 FS.
thanks heaps for taking the time ... I was actually not really aware that there was a real difference between MB/MiB ... thought it was just some linux-special naming.
I only discovered this myself after watching Nick from thelinuxexperiment mentioned it in one of his videos which then led me to search for converter.
Something else to mention is to make sure you disable BitLocker on Windows 10 before you start changing over to Zorin, so check if it is enabled, and also prevent fastboot in the hidden Power Settings. Also disable FastBoot in the BIOS.
If you want to maintain SecureBoot then I advise you use Ventoy which has a MOK util present to allow you to enrol the Ventoy.efi to enable you to boot off the Zorin .iso.
When creating the Ventoy USB, use the GPT setting which should enable you to create partitions using GPT method.
Crucially I would backup all your data and to also create an image of your Windows 10 install using Rescuezilla in case you hit any problems.
Oh and don't forget to download your copy of the Unofficial Manual from here: