Intel B50 with Kernel 7.0.0-38-generic

Hello everyone,

I encountered an issue where my Intel b50 drivers (mesa) on Zorin 18.1 Pro wouldn't detect the GPU with a recent kernel update to 7.0.0-38-generic. I rolled back to 7.0.0-34-generic successfully using this post.

However, when I tried to set the grub menu to always select 7.0.0-34-generic on boot using this in my grub file /etc/default/grub

GRUB_DEFAULT=saved
GRUB_SAVEDEFAULT=true
GRUB_TIMEOUT_STYLE=menu
GRUB_TIMEOUT=10
...

Then I used sudo update-grub to save the configuration. The output of that command is the following:

Sourceing file '/etc/default/grub'
Generating grub configuration file ...
Found theme: /usr/share/grub/themes/zorin/theme.txt
Found linux image: /boot/vmlinuz-7.0.0-38-generic
Found initrd image: /boot/initrd.img-7.0.0-38-generic
Found linux image: /boot/vmlinuz-7.0.0-34-generic
Found initrd image: /boot/initrd.img-7.0.0-34-generic
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings...
done

The command appears to be working normally, but the system doesn't boot to 7.0.0-34-generic without manually selecting that specific kernel each time.

I'm considering deleting the files /boot/vmlinuz-7.0.0-38-generic and /boot/initrd.img-7.0.0-38-generic to just remove the kernel I don't want/need. If that's a safe option, how do I prevent it from downloading in the next update.

On the other hand, perhaps I made a typo in the grub file and I'm just not seeing it?

Regards, kilo

Had you booted with kernel 7.0.0-34 when you edited the grub file and ran sudo update-grub?
Make sure that this kernel is running with

uname -r

before you edit the grub file and update grub.

Thank you for helping me verify.

I found the issue, which was partially user error due not being familiar with grub: When the computer was booting, grub was highlighting advanced options and I kept selecting "Zorin OS" which manually loaded the most recent 7.0.0-38-generic. If I leave it alone with the grub settings that I updated, it highlights "Advanced options" and presumably within that menu the correct kernel flagged with the "saved" parameter.

Hopefully at least this helps someone else with a Intel card that might have issues like I did with 7.0.0-38-generic.

Thank you again for your help and time :slight_smile:

1 Like

Yes, just wait the 10 seconds without moving the selected box or press enter when the Advanced options for Zorin are selected.
When you select Zorin OS, you boot with the latest kernel.