You are absolutely, right.
Differences are night and day.
Look, I am the first to admit that I am not the best at cable management, I got some wires going across my floor in here, but its a bedroom, I hardly give a crud. But if there were to be a lot of foot traffic in here, I'd at least run the wires through a threshald thing for safety, you know that whole OSHA safety reg deal?
However, were not talking about my disorganized bedroom are we? No. We are talking about a commercial building situation, where a server room in a professional space is of concern. And looking at that spaghetti mess, even I know I could do better. I am no cable installer, and even I know a better way.
First, the rack mounts are not being used properly, you should only be using rack mountable computer cases made for rack mount shelving. So the first thing that needs done, is get that desktop computer case, that don't have no side panels, out of there. Sucker probably heats up like dawntays inferno, which is why it don't have no side panels.
Alright, a reminder that I am no cable installer, but I got some ideas. First of all, ethernet cables in a professional setting should be blue in color, it helps to easier differentiate them from black power cables or specialized POE cables. And the ethernet cables should be coming down from the ceiling.
All the cables should be neatly run through ceiling condoit going in and coming out of ceiling. Now, there will be a lot of them usually, so what were going to want to do, is use a modern piece of technology called cable combs. Why you ask? Cause cable combs force the ethernet cable to straighten up.
The cable combs will organized the cables and make them neat, and like I said, straight. What I would want to do, is run those cables along the side frame of the rack mounts, I can use velcrow ties to secure them along the framework. Then I would just rout them to the front where the network switch is, and plug them in.
Again, the cable combs keep them need, velcro ties keep them secured. This way, there is no mess, and you don't have cables going every which way to Sunday. Power cords should be plugged in from the back, never the front of the rack mounts. Those power cables can be grouped together via velcro ties, then secured along the inside of the rackmount framework, until we reach a 12-port to 24-port power switch.
You wouldn't have wires going everywhere with my setup. My setup would be clean, organized, tidy, you would feel a sense of pride walking through the room. And I am pretty sure my job would end up being actually OSHA approved. Unlike that spaghetti mess we just witnessed.
So what do you think, you guys like how I would do it?
Oh, wait did I derail the discussion again??
Perhaps I should start at new thread about cable management.
In simple terms, if it looks right, it probably is right.
Even a small home installation can be neat and tidy. That way it is easy to cable trace and fault find without having to unravel a knitting knightmare to find where the cable goes.
Motto: Install it as you wish to maintain it.
I split the thread
so that we can discuss about a cable management to our heart content
It comes naturally to you.
But @StarTreker can take some of the blame, mentioning this:
The one on the right is so satisfying.
I agree, I love the cable job that was done in the picture on the right, that is an A+ job. I bet just the cable management alone cost the company a few grand lol. Remember, time is money folks.
But I do appreciate a sexy cable management job. Its very nice!
the right one is so colourful and bright while the one on the left is messy,monochromatic,dull and an eyesore
(Ducks and runs)
With much respect to the Russian people, they surely know how to make things work even in what seems to be the most impossible situation. Caution! You might find some images disturbing if you are cable fetish
Ha Ha. There was one that I would regard as reasonable amongst all those photos.
Actually the 3rd one reminded me of @Aravisian on a bad day.
The other one that registered was the one with mass of yellow patch cables. It looked a bit like a wire-wrapped backplane, but a different size and scale.
I did not see any photos showing matchsticks holding wires in place mains power wall outlet (instead of a mains plug). But that is a quantum step up the risk list compared to Cat5 cabling.
Talk about getting caught up in the quantum entanglement!
Has that anything to do with black holes?
Also what is Russian for "Hard Hat's must be worn"
If you could find that one back, please post a link here.
I'd love to see the reaction of our electrician!
No photo evidence. It was personal experience in a hotel room after I asked for a power lead. Hotel technician used a lead with 2 bare ends and 2 matchsticks. I won't say which country that was, but was a reputable city hotel, not one out in the sticks.
There is a lot of research being done into Quantum entanglement, for many different use cases. One of them is in the use of communication technology with 0-delay latency.
If you watch Star Trek, then you will know that they use subspace communication technology, turns out, how that would work, is through quantum entanglement.
In movies, quantum entanglement was also referenced, as the bases in allowing portals to function. Connecting two points at once, where both points occupy the same space at the same time, and are always reacting to one another.
Theoretically, this would be the type of technology that could allow ports like Startgate to work. Someday it might even allow for Star Trek teleporters, who knows.
But right now, the biggest ones are instant communicating between two points with 0-delay latency. And also, of course, quantum computing technologies, which are being worked on every single day, and perfected, in certain groups.
Take IBM for example, they are running a cloud server, souly for the basis, for Quantum computing technologies.
Sounds like it needs an ambient room temperature of 0degKelvin (-459.67F) to work. Global warming is not going in the right direction for that to happen then. Need a new ice age.