As long as i can get users away from Windows i dont care what linux version they use 
.
1 Like
Which I only managed to find those:
1 Like
Actually OP got a 16 Pro and he wants to use it.
I know, but i wanted to know if he could pass it or not the sgx message
Ah, now I understand.
It is an excellent idea 
OP can just make another installer USB with POP and test it out without installing it.
1 Like
Note: Your BIOS may only have the Enabled and Disabled options, or it may not have these options if it only supports the Software Controlled option (or if it doesn’t support Intel SGX at all). Check with your device manufacturer to determine whether or not Intel SGX is supported on your system.
When Intel SGX is set to Enabled in the BIOS, Intel SGX has been enabled, and Intel SGX instructions and resources are available to applications.
When Intel SGX is set to Software Controlled, Intel SGX is initially disabled until it is enabled via a software application
SGX can be enabled/disabled by software too
For that I need win10 ... But I m nearly sure that my pc doesn't support this
Did you check every tab in the bios ?
Did you look in CSM ?
1 Like
Mmmmmmm ye , I even wrote on search bar SGX , or a something else like that and I didn't find anything...
I did , I showed uo there all the settings avalable into the CSM
OP got a fancy m/b.
Manual:
1 Like
Yes I did
I checked the user manual.
Found absolutely no mention about SGX.
Read the manjaro solution...
I've read.
Sounds like there is no solution....
Long story short I would not recommend using a 10th gen comet lake on ANY of their boards . Not only because of the SGX issue but their bios is geared toward rocket lake .
@Heyrer2 Here a possible solution
If you can not enable SGX in firmware you can add the boot option nosgx so the kernel will not try and use SGX when it detects the CPU supports it.
1 Like
It sounds good.