Failed to start zorin in ssd

Some reading on installing on SSD: https://zoringroup.com/forum/5/13610/#p59522

If your problem is BIOS incompatibility: https://zoringroup.com/forum/5/12606/

If your problem is black screen: [SOLVED] Black screen after install - get to the point where Aravisian states “Hit ctrl+x to exit, select “y” to save (I am going off memory here… You may not need to hit “y” at this point)… and continue to boot up.” Now follow instructions below.
Then once booted, run the System Tools -> Software Updater and make sure your Settings look like this. Check for anything under Additional Drivers tab. Then let Software Updater run and install all updates.

2 Likes