Stop when try to install Zorin Lite 17

[AamerHelmy]

I have this error when try install Zorin lite 17 in my old PC , I am new user ..

[Ocka]

Gday @AamerHelmy Welcome to the community!

Can you tell us what is the bootable device your using? (USB Stick, SD Card, DvD?
What program did you use to create the bootable device?
Whats the Brand/Model of the PC? + Age?
Ram?
CPU:?
Drive/ssd/hhd + size=?
Graphic's card?

[swarfendor437]

Follow @zabadabadoo 's guide on checksums here:

Methods of downloading Zorin OS

Make sure you check the SHA256 Checksum of downloaded file (particularly if downloaded from 3rd party site), against that published on the Zorin website. You can verify whether the file has been downloaded correctly without corruption by verifying that its sha256 checksum matches the one listed after pressing the “View sha256 checksums” button on this page: Download - Zorin OS To verify the checksum, we would recommend you to use an app called QuickHash, which can be downloaded from here: http…

[zabadabadoo]

Also, this is good read prior to new install of ZorinOS: Before you install

[AamerHelmy]

I used usb bootable .
I used blena to create it .
my pc :
cpu : amd athlon x2
board : gigabyte ga-ma74-s2
hdd : 320g
garphic's card on board

[Ocka]

Thanks for that.
I forgot to ask are you wishing to dual boot? "Install alongside"?
Can i ask you to create a bootable USB stick with "Rufus" please, lets see if that helps.

[AamerHelmy]

alongside , ok I will try Rufus now .
but I want to tell you it was booted to first screen to zorin good after choose any choice it will take me to this error in my post .

[Ocka]

Please remember to run the checks posted above, this is important.

Also Disabling Windows "Fast Startup" within the windows OS. This is also noted in the above posts.
For now you can leave Secure boot & Fast boot Enabled.

keep us informed.

[AamerHelmy]

I did some tricks
I extracted the hard drive and put it in another PC, then I installed the Zorin lite from the same flash drive. It worked successfully.
Then I returned the hard drive to the first PC which has the first problem, it works ok .but I think there are some errors in the drivers, especially the Vega card, because the screen resolution is not correct.
I think that the first problem is caused by the fact that the board is not supported or there are no drivers for it, and this is what led to the first error during installation for the first time.
Now, can you help me adjust the graphics card driver?
Knowing that this is my first day in Linux, even though I have been a Windows expert for 26 years

[swarfendor437]

So we can find out the details of your graphics card please open a terminal (Menu | Utilities | Terminal) and enter:

sudo lshw -C video

and post back the results please.

[AamerHelmy]

*-display
description: VGA compatible controller
product: RS740 [Radeon 2100]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 5
bus info: pci@0000:01:05.0
logical name: /dev/fb0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm msi vga_controller bus_master cap_list rom fb
configuration: depth=32 driver=radeon latency=32 resolution=1024,768
resources: irq:18 memory:d8000000-dfffffff memory:fdff0000-fdffffff ioport:ee00(size=256) memory:fde00000-fdefffff memory:c0000-dffff

[AamerHelmy]

can i find app search for all drivers need to be update like windows ,
like driveridentifier?

[AamerHelmy]

[zabadabadoo]

@AamerHelmy

can i find app search for all drivers need to be update like windows ,
like driveridentifier?

AMD graphics is usually supported in the linux kernel.
You could maybe try downloading linux drivers as .deb file from here. https://www.amd.com/en/support/linux-drivers

Select Ubuntu x86 64-bit and choose the Ubuntu 22.04 version (for Zorin 17).
Do Read the Radeon™ Software for Linux® Driver installation instructions​​​​​

[AamerHelmy]

the driver didnt run